Discontinued OEM / Factory Stripes, Logos and Decals.

 Custom Fabrication for Toyota Trucks and 4Runners. 

 Motorcycle/Auto painting, decals, logos and pinstriping.


Check out my 93 4Runner Project build.

Bike Decals &  Logos
Toyota Stripes
Nissan Stripes
Ford Stripes
GM Stripes
Dodge Stripes
Mazda Stripes
Jeep Stripes
Misc Stripes & Decals
Urethane Chip Film
Window Graphics
Decal Instructions
4Runner Project
2000 4Runner Build
Paint Samples/Prices
Custom Trailer
Articles & Feedback
Fallen Riders
Warranty / Returns 


Pay for items with any credit card or a PayPal account. It's safe, easy and free.

Solution Graphics

Pillion Pads (P Pads, Pillow Pads)

Custom hand made P Pads in various sizes to fit your specific needs.

New, more flexible Polyethylene base with either 1" or 2" dense foam.  5" X 8" and 6" X 10" sizes.

Custom stitching available on request. See Maltese Cross sample below.

6 suction cups on pad to insure staying power and even displacement of weight.

5X8X1 Leather w/Maltese

5X8X1 Leather w/Maltese

5X8X1 Vinyl

6X10X2 Vinyl

6X10X2 Bottom

6X10X2 Vinyl


Pillion Pad 5X8X1 in Vinyl 

  $75  plus S&H

Pillion Pad 5X8X1 in Leather 

  $92  plus S&H

Pillion Pad 5X8X2 in Vinyl 

  $85  plus S&H

Pillion Pad 5X8X2 in Leather 

  $99  plus S&H

Pillion Pad 6X10X2 in Vinyl 

  $95  plus S&H

Pillion Pad 6X10X2 in Leather 

  $112  plus S&H

Custom Billet Motorcycle Parts

Compression Release Adaptors for RevTech Motors with dual ports.

Save your battery and starter on your high compression motors. Made from cold rolled hex rod.  Now available chrome plated!!

For use with Jims or TP Engineering 10mm compression release valves. CRV's available through Dennis Kirk .

Adapts 10mm CRV to your 12mm port (dual plug) in your head.

10mm allen, 19mm short and 13mm deep sockets are all the tools you need to install.

Push rod tubes slide out of way for install.

12-10 Adaptors

12-10 Adaptors

Adaptors & CRV's

Adaptors & CRV's

Jim's CRV's

Jim's CRV's

Pair of Compression Release Valve Adaptors Only   $75 plus S&H     Sold Out
Pair of Compression Release Valves and Adaptors $160 plus S&H    Sold Out

Installation instructions.

Billet Coil Mount with JDC logo and ball mill. 

Available in Polished or Chromed, with or w/o ignition/choke or ignition/start)

With 3 position switch hole (inset on back shown below) Polished/$95, Chromed/$125.

With switch hole (regular switch / no inset) Polished/$85, Chromed/$115.

Blank (Drill for your own setup, only in polished) $75

Switch available for $34.95

(Parts shown below are raw 6061 Aluminum)

Drilled for ignition front

Drilled for ignition back


Ignition & Choke

Ignition & Choke

DS page 485


Send mail to james@jamesdeancreations.com with questions or comments about this web site.    
Site best viewed at 1024 X 768      Last modified: 02/11/18  

       Submit Your Site To The Web's Top 50 Search Engines for